[OPEN ACCESS] Fabrication of nanocellulose–hydroxyapatite composites and their application as water-resistant transparent coatings

Mai Ishikawa, Yuya Oaki, Yoshihisa Tanaka, Hideki Kakisawa, German Salazar-Alvarez and    Hiroaki Imai

J. Mater. Chem. B, 2015, Advance Article
DOI: 10.1039/C5TB00927H

Abstract
Nanosized composite rods ~300 nm in length and ~20 nm in width were produced by deposition of 22–77 wt% of a c-axis-oriented hydroxyapatite (HA) on cellulose nanocrystals (CNCs). The CNCs functionalized with sulphonic groups were covered with the HA nanocrystals through controlled nucleation and growth under a moderately supersaturated condition in a solution system based on a simulated body fluid. Water-resistant transparent coatings 2–4 μm thick were obtained via evaporation-induced assembly of CNC–HA nanocomposites by casting their suspension on a glass substrate and the subsequent growth of HA nanocrystals by vapour hydrothermal treatment. The composite coatings exhibited improved mechanical strength compared to that of crustacean exoskeletons, and potential for bone regeneration.

Thermally insulating and fire-retardant lightweight anisotropic foams based on nanocellulose and graphene oxide

Bernd Wicklein, Andraž Kocjan, German Salazar-Alvarez, Federico Carosio, Giovanni Camino, Markus Antonietti, and Lennart Bergström

Nature Nanotechnology 10 (2015) 277–283
DOI:10.1038/nnano.2014.248

Abstract
High-performance thermally insulating materials from renewable resources are needed to improve the energy efficiency of buildings. Traditional fossil-fuel-derived insulation materials such as expanded polystyrene and polyurethane have thermal conductivities that are too high for retrofitting or for building new, surface-efficient passive houses. Tailored materials such as aerogels and vacuum insulating panels are fragile and susceptible to perforation. Here, we show that freeze-casting suspensions of cellulose nanofibres, graphene oxide and sepiolite nanorods produces super-insulating, fire-retardant and strong anisotropic foams that perform better than traditional polymer-based insulating materials. The foams are ultralight, show excellent combustion resistance and exhibit a thermal conductivity of 15 mW/m·K, which is about half that of expanded polystyrene. At 30 °C and 85% relative humidity, the foams retained more than half of their initial strength. Our results show that nanoscale engineering is a promising strategy for producing foams with excellent properties using cellulose and other renewable nanosized fibrous materials.

Applications of exchange coupled bi-magnetic hard/soft and soft/hard magnetic core/shell nanoparticles

A. López-Ortega, M. Estrader, G. Salazar-Alvarez, A.G. Roca, J. Nogués
Physics Reports, 2014, accepted manuscript
DOI: 10.1016/j.physrep.2014.09.007

Abstract:
The applications of exchange coupled bi-magnetic hard/soft and soft/hard ferromagnetic core/shell nanoparticles are reviewed. After a brief description of the main synthesis approaches and the core/shell structural-morphological characterization, the basic static and dynamic magnetic properties are presented. Five different types of prospective applications, based on diverse patents and research articles, are described: permanent magnets, recording media, microwave absorption, biomedical applications and other applications. Both the advantages of the core/shell morphology and some of the remaining challenges are discussed.

[Summer school] Organic–inorganic hybrids and composites: from basic understanding to functional materials

The Chalmers Soft Matter Graduate School is organizing a summer school on “Organic–inorganic hybrids and composites: from basic understanding to functional materials”.  Please find attached the announcement. The summer school will take place between 2-5 of september lunch to lunch and it will be held in Djurönäset in the Stockholm archipelago (www.djuronaset.com).

Scope:
Organic–inorganic hybrids and composites have been playing a major role in research and society in recent years. Traditionally, organic–inorganic hybrids have had a focus on the polymeric matrix filled with relatively passive inorganic components. In parallel, with increased interest in alternatives to fossil fuels, there has been a strong move towards the fabrication of functional materials based on biopolymers that can be extracted from renewable sources. Hybrids and composites based on biopolymers are an ideal component for the fabrication of multifunctional materials in combination with various useful inorganic nanomaterials as they can combine impressive properties with environmentally benign and energy efficient production routes.
This course aims to give the participants an understanding of the properties of the organic and inorganic components, preparation methods, characterisation techniques and also examples of functional hybrid materials.

Topics that will be covered:
• Biopolymers: Properties of biopolymers (cellulose, chitin, DNA, proteins) in solutions and dispersions, JL.
• Bionanomaterials: Types of bionanomaterials, sources and isolation methods, GSA
• Nucleation and assembly: i) Nucleation and growth of inorganic materials, ii)Colloidal processing and assembly of hybrids, LB
• Optical characterisation: Polarised light microscopy, JL
• Morphological characterisation: Electron microscopy and X-ray scattering, GSA
• Surface characterisation: Catechols as model systems, DRM
• Interfacial characterisation: Solid state NMR, DL
• Mechanical characterisation: Tensile, flexural, compression testing and fracture toughness measurements, RL
• Bioinspired composites: High performance composites, RL

Lecturers:

Lennart Bergström (Stockholm University)
Jan Lagerwall (University of Luxembourg)
Danielle Laurencin (Institute Charles Gerhardt of Montpellier, France)
Rafael Libanori (ETH, Zurich, Switzerland)
Daniel Ruiz-Molina (Institut Català de Nanociència i Nanotecnologia, Spain)

German Salazar-Alvarez (Stockholm University)

Registration: 
To apply to the summer school send an email to Christina Schütz (christina.schuetz@mmk.su.se) not later than July 28, 2014. The number of participants is limited to 30 and there is a priority to those students enrolled in the “Soft Matter Graduate School”at Chalmers University (www.chalmers.se/soft/); other students and participants are accepted on a first come, first serve basis. The summer school is free of charge for all students doing their PhD at a Swedish university. For students abroad and other participants, the fee is 6000 SEK (incl. accommodation and all meals; excl. VAT).

Schedule and examination:

time\date	Tuesday 2nd	Wednesday 3rd	Thursday 4th	Friday 5th
9-11.30		Nucleation and assembly	Surface characterisation	Project presentations
11.30-13.00	Arrival and lunch	Lunch	Lunch	Lunch and departure
13.00-15	Biopolymer dispersions and solutions	Optical characterisation	Interfacial characterisation
15-17	Bionanomaterials	Morphological characterisation	Mechanical characterisation
17-18	Free time
18-20	Dinner	School dinner	Dinner
20-21	Project assignments		Bioinspired composites

The students are expected to work actively during the course and the participants will receive material to study in advance. During the course there will be individual assignments and individual presentations. We recommend that students after completing the course will be given 3 ECTS.


Contact:
• German Salazar-Alvarez (course leader) (german@mmk.su.se)
• Christina Schütz (registration and practical issues) (christina.schuetz@mmk.su.se) 

[NEWS] Our review is one of the hotest articles in august!

at the Journal of Materials Chemistry A: http://blogs.rsc.org/jm/2013/08/07/hot-articles-for-august/

Functional hybrids based on biogenic nanofibrils and inorganic nanomaterials

Bernd Wicklein and German Salazar-Alvarez
J. Mater. Chem. A, 2013,1, 5469-5478 
DOI: 10.1039/C3TA01690K, Feature Article

Preparation of dry ultra-porous cellulosic fibres: Characterization and possible initial uses

Carbohydrate Polymers, 92 (2013) 775–783

Anna Svensson, Per Tomas Larsson, German Salazar-Alvarez, Lars Wågberg

DOI: 10.1016/j.carbpol.2012.09.090

Abstract


Dry ultra-porous cellulose fibres were obtained using a liquid exchange procedure in which water was replaced in the following order: water, methanol, acetone, and finally pentane; thereafter, the fibres were dried with Ar(g). The dry samples (of TEMPO-oxidized dissolving pulp) had a specific surface area of 130 m2 g−1as measured using BET nitrogen gas adsorption. The open structure in the dry state was also revealed using field emission scanning electron microscopy.

This dry open structure was used as a scaffold for in situ polymerization. Both poly(methyl methacrylate) and poly(butylacrylate) were successfully used as matrix polymers for the composite material (fibre/polymer), comprising approximately 20 wt% fibres. Atomic force microscopy phase imaging indicated a nanoscale mixing of the matrix polymer and the cellulose fibril aggregates and this was also supported by mechanical testing of the prepared composite where the open fibre structure produced superior composites. The fibre/polymer composite had a significantly reduced water absorption capacity also indicating an efficient filling of the fibre structure with the matrix polymer.

[REVIEW] [OPEN ACCESS] Functional hybrids based on biogenic nanofibrils and inorganic nanomaterials

Bernd Wicklein and German Salazar-Alvarez

J. Mater. Chem. A, 2013, Accepted Manuscript

DOI: 10.1039/C3TA01690K

Abstract:

This feature article reviews some of the recent work on the fabrication of functional hybrids based on biogenic nanofibers and inorganic nanomaterials with an emphasis on the functional properties and suggested potential applications. We also discuss some of the work oriented towards the formation of ordered materials in the pursuit of achieving a hierarchical construction. Besides the academic interest in biogenic nanomaterials, it is anticipated that the use of natural, abundant nanomaterials, e.g., cellulose, chitin, collagen, and silk, could provide affordable functional nanomaterials in developing countries.

Cold Consolidation of Metal–Ceramic Nanocomposite Powders with Large Ceramic Fractions

http://onlinelibrary.wiley.com/doi/10.1002/adfm.200800456/abstract

Advanced Functional Materials

Volume 18, Issue 20, pages 3293–3298, October 23, 2008

Enric Menéndez, German Salazar-Alvarez, Alexander P. Zhilyaev, Santiago Suriñach, Maria Dolors Baró, Josep Nogués, Jordi Sort

DOI: 10.1002/adfm.200800456

Abstract

Co/α-Al₂O₃ powder mixtures (5, 10, 20, 30, 40, and 50 mass % of α-Al₂O₃) have been ball-milled and, subsequently, consolidated at room temperature by means of a high pressure torsion procedure in order to produce bulk nanostructured composites. For mixtures up to 20% of α-Al₂O₃, the cold-compaction results in roughly fully dense disks with relatively high microhardness values. However, the compaction for 30, 40, and 50% of α-Al₂O₃ is less effective, resulting in a reduction of the microhardness although a structure in the nanoscale range is still preserved. A detailed structural investigation has been also performed.